P5/8/08
Page 8 of 26
7.
Run the hydraulic hose up the back of the Swim Unit Housing so that the PVC hat
channel will cover the hose.
Firmly secure, but do NOT over tighten, the eight
(8) stainless screws per hat channel.
Repeat for the second hose.
8.
Once both hat channels are attached, pull the two hydraulic hoses tight and secure
them to the top of the Swim Unit Housing using the green hose clamps provided. To
accomplish this, unscrew the green hose clamps, insert the hoses, and re-screw
snugly into the top of the Swim Unit Housing. Locate the bonding wire attached to
the grab rail and run back along one of the hydraulic hoses.
9.
Attach the acrylic hanging bracket to the back of the Swim Unit Housing with four (4)
of the eight (8) stainless steel screws provided.
NOTE: Do not over-tighten.
Leave the two top screw holes unused.
