IM4830B Rev B
19
October 9, 2019
To set or edit the time and date parameters press the left or right arrow keys to step though the different
fields:
•
Set hours
•
Set minutes
•
Set day
•
Set month
•
Set year
Figure 21: Clock setting screen
Editing of values in the field selected is achieved using the up or down arrow keys. Once all necessary
changes have been made, press
ENTER
to exit. The display will then return to the home screen.
Note! Ensure that the time and date are correct before performing a calibration of the Simulator.
4.9.
Backlight operation
Enabling or disabling of the simulator’s backlight is achieved as follows:
From the home screen press the
TOOLS
menu key. Using the down arrow key step through the menu until
“CONFIGURATION” is highlighted. Press the
ENTER
key. In the configuration menu step through the menu
until the word “Backlight Menu” is highlighted. Press the
ENTER
key. The “Backlight Menu” screen is now
displayed.
Figure 22: Backlight menu screen
Use the up and down arrow keys to switch between backlight ON and backlight OFF. Press the
ENTER
key
to save the setting. The display will now return to the home screen.
The backlight can also be toggled on or off by pressing and holding down the home key for approximately 3
seconds. Note that when in the FFT mode, the backlight will remain ON, if selected, i.e. the 30 second timer
is disabled in this mode.
4.10.
Setting the display contrast
The display contrast is adjusted as follows:
From the home screen press the
TOOLS
menu key. Using the down arrow step through the menu until
“CONFIGURATION” is highlighted. Press the
ENTER
key. In the configuration menu step through the menu
until the word “Change Contrast” is highlighted. Press the
ENTER
key. The “Adjust Level ” screen is now
displayed.
