Endace DAG 3.7G Series, Руководство пользователя

Страница: 7 / 34

EDM01-07: DAG 3.7G Card User Guide
©2005 1 Version 7: May 2006
Chapter 1:
Introduction
Overview The Endace DAG 3.7G series consist of two PCI-bus card types, DAG 3.7GF
and the DAG 3.7GP.
The installation of an Endace DAG 3.7G series card on a PC begins with
installing the operating system and the Endace software. This is followed by
fitting the card and connecting the ports.
Purpose of
this User
Guide
The purpose of this User Guide is to provide you with an understanding of
the DAG card architecture and functionality and to guide you through the
following:
•
Installing the Card and associated software and firmware
•
Configuring the card for your specific network requirements
•
Running a data capture session
•
Synchronising clock time
•
Data formats
You can also find additional information relating to functions and features of
the DAG 3.7G card in the following documents which are available from the
Support section of the Endace website at www.endace.com :
•
EDM04-08 Configuration and Status API Programming Guide,
This User Guide and the Linux and Window Guides are also available in PDF
format on the Installation CD shipped with your DAG 3.7G card.
System
Requirements
General
The minimum system requirements for the DAG 3.7G card are :
•
PC, at least Pentium II 400 MHz, Intel 440BX, GX or newer chip set
•
256 MB RAM
•
At least one free 3.3V 32 or 64 bit PCI slot
•
30MB free disk space for software distribution
Note: A 64-bit PCI slot is recommended in order to maximize
performance.