ENDA EM44
01
D
IGITAL TIMER
TECHNICAL SPECIFICATIONS
Note : Relay and S.S.OUT outputs are works synchronized. So, if OUT1 or OUT2 is relayed (on), SSR1 or SSR2 transistor operates.
1/7
Height
Max. 2000m
Do not use the device in locations subject to corrosive and flammable gasses.
Max. humidity 80% for temperatures up to 31°C decreasing linearly to 50% relative humidity at 40°C.
Ambient/Storage temperature
Relative Humidity
0 ... +50 / ° C -25... +70°C
Protection Class
According to EN60529; Front panel: IP65 Rear panel : IP20
ENVIRONMENTAL CONDITIONS
Supply
Power Consumption
Max.
5VA
2.5mm² Screw-terminal power connection, 1,5mm² Terminal plug-in signal connection.
Wiring
Date Retention
EMC
Safety Requirements
EN 61326-1: 2013 (Performance criterion B is satisfied for EN 61000-4-3)
EEPROM (Min. 10 years)
EN 61010-1: 2010 (Pollution degree 2, overvoltage category II)
ELECTRICAL CHARACTERISTICS
230V AC
, 50/60Hz
or
24V AC ±%10, 50/60Hz
or
9-30V DC / 7-24V AC ±%10 SMPS
INPUTS
Start
, Gate, Reset
input
Input types can be adjusted as PNP or NPN in “Programming Mode”.
Minimum pulse and void duration times can be adjusted between 5 and 100ms.
For PNP input types, active level is 5 to 30V pulse,
For NPN input types, active level is 0 to 2V pulse.
Mechanical 5.000.000, Electrical 200.000 operation.
Life expectancy for relay
SSR1, SSR2 output
OUTPUTS
Control output
OUT
1,OUT2
Open collector output (S.S. OUT): Max. 30V DC, 100mA
Auxiliary power supply
12V DC, max. 50mA (without regulation)
Accuracy
± % 0.01 ± 1ms
Housing Type
Suitable for flush-panel mounting according to DIN 43 700.
Dimensions
W
48x
H
48xD87mm
Weight
Approx. 230g (After packing)
Enclosure Materials
Self extinguishing plastics
While cleaning the device, solvents (thinner, gasoline, acid etc.) or corrosive materials must not be used.
HOUSING
Out1
Out2
s
s
m
m
T
A
OUT
MODE
Start
Reset
Gate
EM4401
ENDA
DIGITAL TIMER
0
EM4401-EN-01-180308
SİSEL MÜHENDİSLİK ELEKTRONİK SAN. VE TİC. A.Ş.
Şerifali Mah.
Y.Dudullu 34775
ÜMRANİYE/İSTANBUL-
TURKEY
Tel : +90 216 499 46 64 Pbx. Fax : +90 216 365 74 01
url : www.enda.com.tr
Barbaros Cad. No:
18
Read this document carefully before using this device. The guarantee will be expired by device demages if you don't attend
to the directions in the user manual. Also we don't accept any compensations for personal injury, material damage or capital
disadvantages.
Thank you for choosing
ENDA
EM4401
D
igital
T
imer.
ENDA
TM
Order Code : Em4401 - -
1
2
1 - Supply Voltage
230......230V AC
024......24V AC
SM......7-24VAC/9-30VDC
2 - ModBus
RS
.........RS485 input
Blank
.....N/A
(Specify at order)
48x48mm sized.
Easy to use .
9 Level time intervals. (Between 0-99.99sec. and 0-9999 hours).
Sensor type selection (PNP, NPN).
Selectable up / down counting direction.
Adjustable input signal pulse and void duration.
Memory option can be selected.
12 Different output mode.
Two N.O. contact output and two NPN 50mA SSR output with current limiting.
Display brightness can be adjusted.
P
2x4 line display.
arameter security can be adjusted.
Easy installation and service operations with terminal plug-in connectors.
Rs485 ModBus communication input. (Specify at order).
CE marked according to European Norms.
OUT1 : 250V AC, 10A (for resistive load), NO, NC - OUT2 :250V AC, 5A (for resistive load), NO
