background image

DG - 10/2019 

http://www.end.de 

7

2.3 Complaints

Claims for replacement or goods which relate to transport damage can only be considered valid if 

the parcel service / forwarder has notified without delay.

In case of returns (because of transport damage / repair), please make a damage protocol and 

send the parts back to END-Armaturen, if possible in the original packaging,

In case of a return, please mention the following:

 

 

• Name and address of the consignee

 

 

• Order-/ article-number

 

 

• Description of the defect.

2.4 Guarantee

For our pressure actuated valve we give a guarantee period in accordance with the sales contract. 

The end of the normal duration of live of the wearing parts represents no defect.

The  warrently and guarantee rules of 

END-Armaturen GmbH & Co. KG 

are applicable.

2.5 

Symbols and their signfication

Paragraphs which are identified with this symbol contain very important advices; this also includes 

advices for averting health risks. Oserve these paragraphs without fail!

Paragraphs which are identified with this symbol contain very important advices; this also includes 

how to avoid damage to property. Observe these paragraphs without fail!

This symbol indicates paragraphs which contain comments/advice or tips.

This bullet identifies the description of actions which you should carry out.

Symbols and their signification

Содержание DF3D

































Отзывы: