ENCRAJE LC-1700, Руководство пользователя

Страница: 18 / 19

16
LC-1700 Automatic Laminator User Manual
п*HQHUDO3UREOHPV 6ROXWLRQV
Problem
Control board no power
Unable to rotate
Paint not exquisite or white spot
Paint Bubble or wrinkle
Paint laminated skew
:ULQNOHRQŁLP
Paint rolled up
Cause
No power on or emergency stop switch
Two ruuber roller’s pressure too big
Damper assembly friction too big
0RWRUVSURFNHWNH\ORRVHRUIDOORł
Motor or reducer fault
Rubber roller temperature not high enough
Dust on paint media
Flim quality problem
Two tubber roller’s pressure too small
Rubber roller’s pressure not balance
Paint to be laminated not spread smoothly
Too low speed,too high temperature
Rubber roller’s pressure not balance
Paint not put vertically at the beginning
Flim’s tension too small
Upper roller’s temperature too low
Flim skew
Flim tension too big
Take up roller structure tension too big
Solution
Check power supply or emergency stop switch
Lift upper roller more
Adjust the damper
Fix and tighten sprocket key
Replace motor or reducer
Higher roller temperature as required
&OHDQWKHGXVWZLWKŁH[LEOHSDSHU
&KDQJHŀOP
Adjust rollers’s pressure
Adjust rollers’s pressure
spread paint smoothly or out it vertically between rollers
Higher speed or lower temperature as required
Adjust roller’s pressure balance as manual told
paint put vertical with rollers
$GMXVWŀOPWDNHUROOHUҴVGDPSHU
Adjust to require temperature
5HORDGWKHŀOPDJDLQ
Adjust proper tension
Adjust proper tension