ENCRAJE LC-1700, Руководство пользователя

Страница: 15 / 19

13
LC-1700 Automatic Laminator User Manual
н/DPLQDWLQJ2SHUDWLRQ&RXUVH
Laminating is a very delicate and technical job. For beginners,
laminating work should be carried out under the guidance of
an experienced technician. Only the general laminating operation
is explained below.
1. Hit the power switch.
2. Press the key; set the required heating temperature. The
rubber roller starts to heat up. Generally, the preset temperature
is set to 35 ° C when cold-laminating and laminating at low
temperature (it takes about 10-20 minutes to reach the working
temperature).
Generally, the heating mode does not need to be turned on
ZKHQFROGODPLQDWLQJWKHŀOP
7DNHDUROORIŀOPDQGSXWLWLQWRWKHŀOPUHHO$IWHUSXWWLQJWKH
ŀOPUHHOLQWKHFRUUHVSRQGLQJEUDFNHWSXOOWKHŀOPE\KDQGWR
ensure proper resistance.
4. Mount the picture to be mounted on the scroll and put it on the
stand in front of the machine.
5. Press the key to raise the glue roller.
,QVWDOODWLRQPHWKRGRIFROGODPLQDWLQJŀOP:KHQFROGODPLQDWLQJ
ŀOPLVXVHGIRUFROGODPLQDWLQJJHQHUDOO\QRKHDWLQJLVQHHGHG
but if the sizing roller is heated to about 35 ° C, the cold laminating
HłHFWZLOOEHEHWWHU3XOOWKHŀOPRXWDQGZLQGVWLFNLWEHWZHHQ
the two rubber rollers on the winding shaft. Use a paper cutter to
VHSDUDWHWKHŀOPIURPWKHEDFNLQJSDSHUDWDQDSSURSULDWH