– Page 13 –
PROG PASSWORD
/ / / /
In case it is desired to set a new password, press
key and the first slash (digit) will start blinking. (Please note
the factory default is 0000).
Now, select
key and each time it is pressed, the digits will change. Insert the default password and press
AL.ACK
key and the following program mode screen will appear.
PROGRAM MODE
Press
MODE
key and the following screen will appear
METERING SETUP
NEW PASSWORD
0000
To change to a new password
By using
and
keys, enter the new password and then press
AL.ACK
key. The new password is
now set- record this securely as all future access to the controller will require this authorization password.
To change to Operating Voltage
By using
keys, the following screen will appear.
METERING SETUP
OPERATING
VOLTAGE
0600
If the operating voltage is to be changed, press
key and the first slash (digit) will start blinking. Now, select
key and each time this is pressed, the digits will change. Insert the currosponding operating voltage and press
