Wiring
4 PIN WIRE HARNESS:
White wire: POSITIVE PARKING LIGHT RELAY OUTPUT
Connect the WHITE wire to the parking light wire coming from the headlight switch.
Do not connect the WHITE wire to the dashboard lighting dimmer switch. (Damage
to the dimmer will result). The limitation of the WHITE wire is 10 AMP max. Do not
exceed this limit or damage to the alarm and parking relay will result.
Red wire : SYSTEM POWER (+12V CONSTANT) —
The RED wire supplies power to the system. Connect this wire to a stable constant
+12 volt source.
Yellow wire : 12 VOLT + WITH IGNITION ON
Connect this wire to a 12 Volt source when the ignition of the vehicle is in the ON or
RUN position.
Black wire : SYSTEM GROUND –
This is the main ground connection of the alarm module. Make this connection to a
solid section of the vehicle frame. Do not connect this wire to any existing ground
wires supplied by the factory wire loom, make the connection to the vehicle’s frame
directly.
