VSR-30™ Installation Guide
23
2
On the IP Routing Configuration menu, do the following:
a
If the IP routing method is RIP, select and configure RIP Routing. Follow the procedure
for RIP routing in the BANDIT Products Software Configuration and Maintenance Guide.
b
If the IP routing method is Static, select and configure Static Routing. Follow the
procedure for static routing in the BANDIT Products Software Configuration and
Maintenance Guide.
For more information, see the BANDIT Products Software Configuration and Maintenance Guide.
E.5.2 IP Quality of Service
To use the VPN feature to its capacity, you must configure the device’s IP Quality of Service.
Do the following:
1
On the IP Routing Configuration menu, select IP Quality of Service.
2
On the IP Priority menu, select Prioritization.
3
On the IP Quality of Service menu, do the following:
a
Select Status, and Enable IP quality of service.
b
Select Quality of Service Table, and configure entries in the table.
c
Set a Default Priority for IP packets that do not match any entry in the table.
Entry IP Address Net Mask Gpt Name Next Router Mode MTU
---- --------------- -------------- ------------ -------------- ------ ----
1 192.168.169.1 255.255.255.0 MODEM 0.0.0.0 Off 1500
Add, Modify, or Delete an Entry? (Enter A, M, or D):
Entry IP Address Net Mask Next Router Path Name Hops
1 1.2.3.4 255.0.0.0 Unnumbered a 1
Add, Modify, or Delete an Entry? (Enter A, M, or D):
Source Src
Destination Dest
# Address Port Address Port Protocol Path Name Priority
--- --------------- ------ --------------- ------ -------- ---------- ----------
1 * * * * * * Immediate
* * * *
* * * *
Add, Modify, Insert or Delete an Entry? - (A/M/I/D) :
