VSR-30™ Installation Guide
17
3
Do one of the following:
a
To modify an entry, type m. Go to
Step 4
.
b
To copy an entry, type c. Go to
Step 5
.
c
To add an entry to the bottom of the list, type a. Go to
Step 6
.
d
To add (insert) an entry at a specified point in the list, type i. Go to
Step 7
.
e
To delete an entry, type d. Go to
Step 8
.
f
To return to the Virtual Private Network Configuration menu, press the Escape key
twice.
❖
The Virtual Private Network Configuration menu appears. Go to
Section E.4, Virtual
Private Network Connections
.
4
Do one of the following:
a
To modify an entry, do all of the following:
• Type the line number of the entry you wish to modify.
❖
The entry’s list of values appears.
• Select the field you wish to change.
❖
The possible values for the field are listed.
• Select the new value for the field.
❖
The new value is accepted, and the entry’s list of values appears again.
b
To return to the IP/VPN Policy Table, press the Escape key.
❖
A prompt asks whether you wish to save the changes you made.
c
Answer yes (or no, if you decide not to keep the changes).
❖
The IP/VPN Policy Table appears. Return to
Step 3
.
Source Src Destination Dest Protocol
# Address Port
Address
Port /Flag Path Name I/O Action
--- --------------- ------ --------------- ------ -------- ---------- --- ------
1 10.5.6.0 * 172.23.9.0 * * * *
10.5.6.255 * 172.23.9.255 *
Tunnel To Remote 1 Action: Initiate VPN Profile: Remote
2 * * * * * * *
* * * *
Allow ALL Action: Allow
Add, Modify, Insert, Copy or Delete an Entry? - (A/M/I/C/D) : a
