Doc. No: 01999929
Revision: C
3 of 10
Issue Date: 08/15/21
FIGURE 2
FIGURE 3
PARTS SHOWN
1. Bottom Front Connector Tees (x2)
2. Top Connector Tee (x4)
3. Bottom Rear Connector Tee (x2)
4. Floor Support Flange (x4)
5. Screw (x38)
6. Fender Washer (x76)
7. Panel Clamp (x38)
8. Lock Nut (x38)
9. Vertical Structural Support (x4)
10. Side Horizontal Support (x4)
11. Front & Rear Horizontal Support (x3)
12. Right & Left Side Panel (x2)
13. Rear Panel (x1)
PART II
FIGURE 4
SIDE STRUCTURE ASSEMBLY – USE ILLUSTRATIONS AS NOTED
1. Slide ITEM 3 over threaded end of ITEM 9 and thread ITEM 4 creating a front vertical stanchion.
SEE FIGURE 5.
Note: Tighten ITEM 4 to ITEM 9 aligning bolt holes such that sufficient room for bolt placement is available
(see note on FIGURE 5).
2. Place ITEM 1 over ITEM 9 and thread ITEM 4.
SEE FIGURE 6
.
Note: Tighten ITEM 4 to ITEM 9 aligning bolt
holes such that sufficient room for bolt placement is available (see note on FIGURE 6).
FIGURE 5
FIGURE 6
