www.
en
c
loscreens
.com
7
ASSEMBLY
INSTRUCTIONS
ZP19047
Ensuring the routed
holes are facing
down, slide the other
horizontal rail over
the top of the posts.
Continue sliding the rail
down, inserting each
vertical picket into the
routed holes in the top
rail, until the pre-drilled
holes in the top rail and
posts align. Drive (4)
¾” self-drilling stainless
steel screws into the
pre-drilled holes.
Ensuring the routed holes are
facing up, slide one rail over the
bottom of the posts. Slide the rail up
and guide the vertical pickets into
the routed holes. Continue sliding
the rail up until the pre-drilled holes
in the rail and posts align.
Note:
align holes.
B
H
1.
Slide the Post Anchors
(B)
into the bottom of the
post. 16" of post anchor should be visible.
2.
Use the 1/8" Drill Bit
(K)
to drill (4) total holes in
the post anchor through the pre-drilled holes in the
bottom rail.
3.
Drive (4) 3/4" Self-Drilling Stainless Steel Screws
(H)
into the pre-drilled holes in the horizontal rail.
K
STEP 4.2
STEP 4.3
STEP 4.4
