manualshive.com logo in svg

ENCAD Encad NovaJet 1000i, Справочное руководство, Страница: 14 / 96

Поделиться
Скачать
ENCAD Encad NovaJet 1000i Скачать руководство пользователя страница 14

 Introduction 1-8

 

Encad 1000i Reference Guide

Introduction

Introduction

Introduction            Printer Options              Menu Tree              Technical Info           Error Messages       Troubleshooting

1

   1

 

To install the cutter

1

Press 

Utility Menu/Access Cartridge 

to move the carriage out from the service station.

2

The cutter fits into the left side of the carriage. To remove a used cutter, push the cutter lever down and
pull it out. Install the new cutter by pushing it into the slot until it clicks into place.

                                             

3

Press 

Utility Menu/Access Cartridge

 to move the carriage back into the service station. This ensures that

the cutter blade is in the home position.

Choose the correct printing mode

By choosing from a variety of color, quality, and resolution modes, you can make choices between drawing
quality, colors, and speed. When printing images with large areas of color, always choose one of the enhanced
printing modes (High Speed, Productivity, Fine, Enhanced, or Ultrafine).

Use the right software

The quality of the software driver or the RIP can be very important, especially when printing continuous tone
images. Error diffusion or stochastic screening algorithms can yield photo-like images, even when these images
are scaled to full size. Software without advanced imaging features may produce images which are grainy when
enlarged.

Содержание Encad NovaJet 1000i

































































































Отзывы:

Нет отзывов