5
3.2
Using the Constant-ON Mode:
3.2a
Press and hold the ON/OFF Key for 3 sec. The LED display will show “ON”to
indicate the unit is in the Constant-On mode. The unit will start immediately
after “ON”is shown.
3.2b
To stop working under Constant-on mode, press the ON/OFF key. The LED
display will indicate a timer time last set.
To resume Constant-On, press ON/OFF key again and repeat the step 3.2a)
OR
To stop working immediately, switch the power switch to turn the power off.
To restart, switch the power switch to turn on the power.
Note:
To switch to the timer mode when it is working under Constant-on mode, press
the ON/OFF key and follow the instruction 3.1.
During Constant-On Mode, the UP and Down keys are not functioning.
If the Constant-ON mode was last used before turning the power off, after
turning the power on, the LED will indicate “ON”. The unit will start working
after 3 sec
WARNING: To avoid overheating when running it for an extended period of time, keep
the area around the generator free from obstructions to maximize air movement and use
an external fan if possible.
GUIDANCE FOR APPLYING OZONE TREATMENT
For any liquid treatment, place the unit at
least 10cm above the liquid’s surface to
prevent it from entering the generator. For air
treatment it is recommended to run without
the hose connecting to the ozone outlet.
WARNING: Place the unit at least 10 cm
above the liquid’s surface to prevent
backflow.
Application
Functions
Time
Making pure water,
ozonated water.
You can ozonate water to remove contaminates or
to introduce ozone into your system. If you goal is
to remove contaminants, ozonate 1 litre for 10
minutes then let sit for 1 hr. To create ozonated
water for ingestion, ozonate RO or distilled water /
ice cubes for 10 minutes then drink within 10
minutes. Please consult your doctor or research
ozonated water on the web for more information.
10 minutes
on High
for 1 litre.
