I
NSTALLING
T
HE
821W O
UTDOOR
E
THERNET
E
XTENDER
The Enable-IT 821W Waterproof Ethernet Extenders have a distance reach of up to 1,650ft
(500m) over any 1-pair wiring (Telephone, Coax, or Category rated) between the 821W
Waterproof units. You can add additional 328ft (100m) onto the end of each 821W Waterproof
LAN output ports for a total distance of 2,306ft (702m) from device extension to device
extension. Therefore a site survey of the wiring and installation planning are highly
recommended. For highest performance use lower gauge wiring like 14AWG ~ 24AWG for the
interlink wiring.
The Overview Diagram: This diagram shows the contents of the product box inside the rectangle. Devices
outside the rectangle above are your equipment that can be attached.
We highly recommend that you perform a quick out of the box test to ensure the working order of your
Enable-IT 821W Waterproof Ethernet Extender units prior to installing. This will also serve to
familiarize you with how easy the process should be. Follow the steps below to perform the Out Of the
Box Test.
Step 1
- Attach the 821 DC power adapter to the 821W Injector unit and to your AC outlet. The Power LED will
indicate the unit is receiving power as well as the 821W 56V 65W DC Power Adapter green LED.
Step 2
- Connect the 821W Waterproof units together using one of the Ethernet LAN Patch cords provided –
attach to the RJ-45 LRP Interlink port on each 821W Waterproof unit as shown by the green line connecting
the ports in the diagram above. The Power LED indicator on the 821W Waterproof Extender unit and LAN
ports will provide visual operational status of the 821W Waterproof units.
Step 3
- Attach and test and to confirm your LAN Equipment works through the 821W Waterproof extension,
connect your Ethernet LAN to the 821W Waterproof Injector unit LAN port and the remote device/s to the
821W Waterproof Extender LAN port and test connectivity.
This confirms basic proper operation of the units.
Performing the On-Site Installation
After removing the Enable-IT 821W Waterproof Ethernet Extender Kit from the box, and
performing the Out Of The Box Testing (OOTBT), all that remains to install the unit on-site is to
mount the unit, build the interconnect wiring, add voice lines if needed, and attach the LAN
device cabling with the provided Ethernet Patch cords.
All Rights Reserved © 1997 - 2020 Enable-IT
™
, Inc. Page
!
of
!
2
7