EMX Industries, Inc. 721H5, Руководство по эксплуатации

Страница: 15 / 19

14
System Programming Guide – Quick Reference
Commands Description
*PPPPPP#
or follow step 1 & 2
1. Present card with address
#00000 to the reader, and input PIN
Code and # sign if the card is in
"Card and PIN Code" access
mode. 2. Press # key in 3 seconds.
PPPPPP= 6-digit Password .
Either way can enter
Edit Mode .
Default setting:
PPPPPP = 123456.
*#
or
**#
Either way can exit Edit Mode and then in User Mode , however
**#
will also
set the arming.
00*NNN# Assign a Reader Number 001 ~ 254 to itself.
02*TTT# Door Unlock Time Setting. Forever or 1 ~ 600 seconds or 0.1 ~39.9 seconds.
03*TTT# Alarm Time Setting. Forever or 1 ~ 600 seconds.
05*TTT# Arming Delay Time Setting. 1 ~ 600 seconds.
06*TTT# Alarm Delay Time Setting. 1 ~ 600 seconds.
09*NNNNNNnnnnnn# Change Edit Password . User has to enter new password twice.
10*SSSSS*EEEEE# Disable the proximity cards with addresses starting from SSSSS to EEEEE .
After disabled, the cardholder(s) can't access the system.
10*SSSSS9EEEEE# Delete the proximity cards with addresses starting from SSSSS to EEEEE from
system.
11*SSSSS*EEEEE# Enable the proximity cards with addresses starting from SSSSS to EEEEE . After
enabled, the cardholder(s) can access the system by using " Card Only " mode.
12*SSSSS*PPPP# Assign a PIN Code PPPP to an individual card with address SSSSS . After
assigned, the cardholder can access the system by using " Card or PIN Code "
mode.
13*SSSSS*PPPP# Assign a PIN Code PPPP to an individual card with address SSSSS . After
assigned, the cardholder can access the system by using " Card and PIN Code "
mode.
17*FFFF# Assign 4-digit Function Code FFFF .
18*TTT# Arming Idle Time Setting. 1 ~ 600 seconds.
19*SSSSS*NNNNN# Register a number of card(s) to the system. After registered, the cardholder can
access the system by using "
Card Only " mode. Note: Cards can not be
registered through 721K or 721U .
20*NNN# System parameters setting.
Auto Re-lock : disable value 000; enable value 002
Power on Arming : disable value 008; enable value 000
Door Exit Release : disable value 000; enable value 016
Anti-passback : disable value 000; enable value 128
26*SSSSS*EEEEE*X# Define the proximity cards with addresses starting from SSSSS to EEEEE .to
have or not to have an anti-passback feature.
SSSSS : 00000 ~ 00999
EEEEE : 00000 ~ 00999
X : 1-disable Anti-passback; 0- enable Anti-passback;
2- enable first entry can be made through either 721H5 or 721K/721U .
If SSSSS > EEEEE or SSSSS >00999 or EEEEE >00999, error message.
28*NNN# Disarming Forced Open parameter setting.
NNN : 000 – Without Forced Open feature in Disarming mode.
NNN : 128 – With Forced Open feature in Disarming mode.
29*29*# Delete all the proximity cards and all the Group Numbers .