20 Command Reference Guide
Change Port Speed
Set the serial communication speed (baud rate) in bits per second.
>
Server>> [set |define |change] port
port_num
[
input
|
output
] speed
baud_rate
port_num
The port affected by speed change.
input
Enter the speed at which data is received. If
input speed is not chosen, the command sets
the speed in both directions.
output
Enter the speed at which data is transmitted. If
output speed is not chosen, the command sets
the speed in both directions.
baud_rate
Enter a speed: 75, 110, 134, 150, 300, 600,
1200, 2400, 1800, 2000, 2400, 4800, 9600,
19200, 38400.
Show Port Status - NETJet
Display port status for NETJet printer servers and MIO interfaces.
>
Server>> [show |monitor] port
port_num
status
[netjet |device]
port_num
Enter the port number for which status is
desired.
netjet
Gives the status for NETJet connected to MIO
interface (port 1).
device
Gives the status of a Hewlett-Packard MIO
printer interface.
