Command Reference Guide 17
Port Commands
Show Port Characteristics
Display the characteristics of a specified port.
>
Server>> [show |list] port
port_num
ch
port_num
The printer server port number.
This command will display a detailed listing of all port options such as:
local group, hardware group, network group, LAT_compatible group,
and TCP/IP group.
Test Port
Verify the operation of a port by sending a test pattern of characters to
the port. Terminate the test by pressing any key.
>
Server>> test
port_num
count
count_num
port_num
The number of the port to be tested.
count_num
Enter the number of times the test pattern will be
sent to the port. The default is 23.
Deviations observed in the pattern indicate problems with either the
device connected to the port or its cable connection to the printer server.
If using the test command on a port connected to a PostScript printer, the
printer will display an error condition.