Installation
Caution
Emulex LightPulse
®
Host Bus Adapters (HBAs) contain
electronic components that can be damaged by static
electricity through an electrostatic discharge (ESD) event.
To prevent ESD damage, maintain constant contact with
any grounded metal surface. A grounding wrist strap is
useful for this purpose. Handle the card carefully at all
times and preferably by the edges. Avoid touching
electronic components and keep the card in the original
packaging until you are ready for installation.
Compatibility
Software
Environments
Wiindows Server 2003, Windows 2000, Windows NT,
Linux, NetWare, Solaris
Hardware
Environments
PCI hardware platforms: x86, SPARC or PowerPC
Prerequisites
PCI/PCI−X 64−bit data and addressing with 3.3 V signaling
•
PCI bus computer with a clock rate up to 66 MHz
•
PCI−X bus computer with a clock rate up to 133 MHz
•
Note
The LP9802DC HBA can be used only in a 3.3V signaling
slot. 66 MHz, 64−bit PCI slots and 66/100/133 MHz, 64−bit
PCI−X slots are 3.3V signaling slots. The LP9802DC HBA
is keyed so it cannot be installed in an incorrect slot.
Media and connectors
•
Emulex Documentation, Drivers and Software
3
