Apply Power
Verify the host bus adapter is securely installed in the computer.
1.
Verify correct media is attached.
2.
Turn on computer.
3.
Observe the Power LED.
4.
Observe status LEDs for Power On Self Test (POST) results.
5.
View LEDs
The power LED and the two status LEDs are located on the faceplate.
The power LED indicates that the cPCI bus slot is supplying 3.3V power to the
adapter.
The green and yellow display lights (LEDs) labeled Status can be seen through
openings in the host bus adapter's mounting bracket. Green indicates power on
self−test (POST) and yellow signifies port activity.
POST conditions and results are summarized in this table.
Green
LED
Yellow LED
State
OFF
OFF
Wake−up Failure (Dead Board)
OFF
ON
POST Failure (Dead Board)
OFF
Slow Blink (1 Hz)
Wake−up Failure Monitor
OFF
Fast Blink (4 Hz)
Failure in POST (Dead Board)
OFF
Flashing (irregular)
POST Processing in Progress
ON
OFF
Failure while Functioning
ON
ON
Failure while Functioning
ON
Slow Blink (1 Hz)
Normal − 1 Gb Link Rate
Emulex Drivers, Software and Manuals
8