Installation
Caution Emulex LightPulse ® Host Bus Adapters (HBAs)
contain electronic components that can be
damaged by static electricity through an
electrostatic discharge (ESD) event. To prevent
ESD damage, maintain constant contact with any
grounded metal surface. A grounding wrist strap is
useful for this purpose. Handle the card carefully
at all times and preferably by the edges. Avoid
touching electronic components and keep the card
in the original packaging until you are ready for
installation.
Compatibility
Software Environments
Solaris (Sparc)
Hardware Environments
Sun Fire servers 3800, 4800, 4810
Prerequisites
The host computer must provide 3.3 VDC bus power (a power LED on
the bracket shows bus power)
•
One open 32−bit or 64−bit (64−bit recommended) cPCI bus slot can be
either 3.3 VDC or 5.0 VDC signaling interface
•
PCI bus clock rate of 66 MHz is preferred
•
Media and connectors
•
Emulex Drivers, Software and Manuals
3