Emulex LP10000ExDC, Инструкция по установке и справочник

Страница: 7 / 21

Attach Media
Note
The host bus adapter will not allow normal data
transmission on an optical link unless it is connected to
another similar or compatible laser product (that is,
multimode to multimode.)
Use multimode fiber optic cable, with short-wave lasers, that adheres to the following
specifications:
Fiber Optic Cable Maximum Length
Minimum
Length Connector
62.5/125
µ
m (multimode)
300 meters at 1.0625 Gb/s
150 meters at 2.125 Gb/s
2 meters LC
50/125 µ m (multimode)
500 meters at 1.0625 Gb/s
300 meters at 2.125 Gb/s
2 meters LC
1. Connect the fiber optic cable to the LC connector on the HBA.
2. Connect the other end of the cable to the Fibre Channel device.
After the media is connected to the host bus adapter, you are ready to apply power to the
computer.
Emulex Documentation, Drivers and Software
7