Emulex LP10000ExDC, Инструкция по установке и справочник

Страница: 5 / 21

Set Jumpers
Caution
Emulex LightPulse
®
Host Bus Adapters (HBAs) contain
electronic components that can be damaged by static
electricity through an electrostatic discharge (ESD) event.
To prevent ESD damage, maintain constant contact with
any grounded metal surface. A grounding wrist strap is
useful for this purpose. Handle the card carefully at all
times and preferably by the edges. Avoid touching
electronic components and keep the card in the original
packaging until you are ready for installation.
The device ID jumpers are used in custom applications. Do not change the jumper settings
for a standard Emulex installation.
The HBA has two pairs of jumper blocks that control the HBA's device ID. You change the
HBA's device ID by changing the jumper settings. P0_JX1 & P0_JX2 control the device ID
for Port 0, and P1_JX1 & P1_JX2 control the device ID for Port 1. The default device ID for
both ports is FA00.
Device ID Port 0
Jumper Setting
Port 1
Jumper Setting
FA00
JX1:1-2, JX2:2-3 JX1:1-2, JX2:2-3
1AE5
JX1:2-3, JX2:2-3 JX1:2-3, JX2:2-3
FA01
JX1:2-3, JX2:1-2 JX1:2-3, JX2:1-2
Emulex Documentation, Drivers and Software
5