Emulex LP10000DC, Инструкция по установке и справочник

Страница: 2 / 21

Installation
Features
The LP10000DC host bus adapter offers a highly integrated 2Gb/s Fibre Channel HBA
for use in servers based on either the conventional PCI or PCI-X 1.0a expansion bus
architectures. The LP10000DC delivers exceptional performance through the use of a
sixth generation Emulex Thor controller. The Thor high-performance controller is a
highly integrated dual-channel device that combines industry standard embedded
ARM9 processors, 1Gig/2Gig SERDES and protocol technology into a single module.
The LP10000DC is a dual-channel HBA in a low-profile PCI (MD2) compliant card
format.
Major Features
●
Full duplex 2Gb/s Fibre Channel delivering up to 400MB/s (per channel)
●
Superior transaction processing performance
●
Automatic speed negotiation
●
Automatic topology detection
●
Full fabric support using F_Port and FL_port connections
●
Onboard hardware context cache for superior fabric performance
●
Support for use of multiple concurrent protocols (SCSI and IP)
●
Full support for both FC service class 2 and 3
●
Full fabric support in x86, Itanium and SPARC environments
●
Support for FC-Tape (FCP-2) devices
●
66/100/133 MHz PCI-X 1.0a and PCI 2.3 compatibility
●
End-to-end parity protection for high data integrity
●
Robust suite of software supporting Windows Server 2003, Windows 2000,
Windows NT, Linux, NetWare and Solaris
●
3.3V signaling, 5V tolerant
●
Optical small form factor (LC) interface
Compatibility
Software Environments
Windows Server 2003, Windows 2000, Windows NT,
Novell Netware, Solaris and Linux
Hardware Environments
PCI hardware platforms: Itanium Processor Family
(for IA-64) and x86 (for IA-32) platforms, SPARC or
PowerPC
Emulex Documentation, Drivers and Software
2