Speedsynchro
®
Modular/NFC
18
Operating instruction edition: 01.09.2022
2.8 Remove the tap/cold-forming tap, the clamping nut and the sealing disk
1. Loosen the clamping nut with
wrench
Attention
In order to avoid damaging of
Speedsynchro
®
Modular/NFC parts, it
is necessary during the loosening of
the clamping nut via wrench
to
support
with open-ended spanner
.
As an alternative to the open-ended
spanner
the assembly device
F3741909 can be used.
2. Pull out tap/cold-forming tap
3. Screw off the clamping nut
4. Tilt collet up to the marking until it is
removed from the eccentric ring
Remove collet
5. Press the sealing disk out of the
clamping nut from the front and
remove it
