Softsynchro
®
6
Operating instruction edition: 01.04.2018 11
2.5 Insert quick-change adapter
Attention
The change of the adapter must not be executed while the machine spindle rotates!
1. Fix the shank.
i.e. by adapting the holder in
the machine spindle
2. Push grip sleeve in direction
of the holder shank and hold
it.
3. Push in quick-change
adapter
Note
The drivers of the holder
must be located in the
grooves of the adapter!
4. Pull the grip sleeve forward,
let go
→ Check, whether grip
sleeve is in front position
Note
The instruction is valid for quick-change tap holders type
Softsynchro
®
6
and for
quick-change adapters type
HE2-IKZ(Z)
Tap/cold-forming tap
Quick-change adapter
Grip sleeve
Holder
Shank
