EMS FireCell FC-868-SE2, Руководство пользователя

Страница: 6 / 24

©2018 EMS Ltd. All rights reserved. Page 6 of 24 MK144 (Iss 3) 30/10/2018 AJM
Survey Kit Overview
CH 1 CH 2 CH 1 CH 2
POWER/
CHARGE
TX
RX
RSSI/dB
START
LOCAL - REMOTE REMOTE - LOCAL
Pole Mounted Survey Tool (1 per kit)
This part of the survey equipment when
used in conjunction with the Signal
Surveyor Unit, identifies accurate signal
strength information between the two
points. Since wireless devices and RCCs both
communicate using the same 868MHz
wireless protocol, the process for device to
RCC/RLM surveys is the same as RCC to
Hub/RCC surveys.
Signal Surveyor (1 per kit)
This part of the survey equipment is used to
communicate with the Device Survey Tool.
This unit will be located in the position of
the proposed Hub, RCC or RLM.
Device Survey Poles (4 per Kit)
The survey poles are used for connection
into the Device Survey Tool. This allows
results to be taken from device locations
which are out of reach.
Note: to ensure optimum surveying accuracy,
it is recommended that minimum two polls
are used with the Survey Tool.
Signal Surveyor mains charger
(provided separately)
The mains charger is used for connection
into the Signal Surveyor units for
re-charging the devices on board battery.
SURVEYOR
DEVICE
LOCAL - REMOTE PASS / FAIL
SIGNAL QUALITY %
REMOTE - LOCAL
BATTERY