SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
eNfusion™ HSD-X and HSD-Xi High-speed Data Terminal
23-15-30
2-1
8 MAY 09
SYSTEM OPERATION
This section describes how to register and activate the HSD-X and HSD-Xi terminals. For
information on how to configure the system, see Configuring the system.
1.
Registering and Activating Terminals
Registering and activating an HSD-X and HSD-Xi terminal includes the following:
•
Preparing Terminal Information
•
•
A. Preparing Terminal Information
Before installing the HSD-X and HSD-Xi terminals, obtain an ISN and identify the Swift64
terminal type.
(1) Obtaining ISNs
EMS SATCOM provides ISNs for the HSD-X and HSD-Xi terminal based on the
intended installation configuration. The last six digits of the ISN are the Forward ID.
When requesting ISNs, please have the following information available:
•
End customer name, including contact information
•
Purchase order number
•
Tail registration number, aircraft type, and serial number of the aircraft on which
the terminal is being installed
•
Serial number of the HSD and the HSD-Xi terminal(s)
•
Intended installation configuration mode (Stand-Alone or non-Stand-Alone)
EMS SATCOM Product Support is available Monday to Friday from 8 am to 5 pm
(EST). On-call support is available outside business hours, Eastern Standard Time.
Contact information for EMS SATCOM:
Product Support
1.888.300.7415
Product Support direct
1.613.591.3086
Canada and USA toll-free Sales 1.800.600.9759
Outside Canada and USA
1.613.591.9064
Fax:
1.613.591.9120
Web:
www.emssatcom.com
(2) Identifying the Swift64 Service Terminal Type
The Swift64 terminal type for all modes of HSD-X and HSD-Xi terminals is 76ES09.
Currently supported service types for HSD-400 terminals operating Swift64 are as
follows:
•
64 kbps speech
Содержание eNfusion 1252-A-4100-01
Страница 4: ...23 15 30 CR 2 8 MAY 09 Blank Page ...
