manualshive.com logo in svg

EMS eNfusion 1252-A-4100-01, Описание системы, руководство по установке и обслуживанию, Страница: 26 / 106

Поделиться
Скачать
EMS eNfusion 1252-A-4100-01 Скачать руководство пользователя страница 26

SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL

eNfusion™ HSD-X and HSD-Xi High-speed Data Terminal

23-15-30

1-2

8 MAY 09

Figure 1-1  Simplified Aeronautical Satellite Communications System

Satellite communication systems provide users with long-range voice and data communication 
by accessing global satellite and ground communications networks.

Inmarsat is an international organization that operates and maintains multiple geostationary 
satellites and satellite networks. The satellites that provide Swift64 services are called I-3 
satellites. Each satellite is located over an Ocean Region (OR); the current OR names are:

•

Atlantic Ocean Region-East (AOR-E)

•

Atlantic Ocean Region-West (AOR-W)

•

Indian Ocean Region (IOR)

•

Pacific Ocean Region (POR)

These satellites provide worldwide telecommunication services for aviation, shipping, and 
land-mobile terminal users. The satellites connect to ground telecommunication systems 
through the LES/GES.

The satellites that provide SBB services are called I-4 satellites. At the time of publishing, 
three I-4 satellites provide SBB services: Americas (98W), EMEA (25E) and Asia-Pacific 
(143.5E). 

The HSD-Xi  terminal extends the communication functions provided by other HSD terminals. 
It does not communicate with the satellite network on its own. It must be installed with a HSD 
to communicate with the satellite network.

Содержание eNfusion 1252-A-4100-01











































































































Отзывы:

Нет отзывов