EMS Wireless SelectaCell-19S, Руководство оператора

Страница: 8 / 20

SelectaCell
TM
Operator’s Manual – Preliminary EMS Wireless
EMS Wireless
SelectaCell®-19S Manual
Confidential and Proprietary Information
IM609873-1 Rev 01
07/11/05
7
5. Once the desired band is selected, hold down the button for 3 seconds, this will now
program the unit for the selected band and enter the unit into downlink monitor mode.
6.
In downlink monitor mode only the downlink signal is being amplified. The LCD display
will have bars on the left side indicating downlink signal and bars on the right side
indicating downlink gain
.
1. Right row is gain setting, full gain is 8 bars
2. Left row is signal strength, up to 8 bars
7.
Position the unit to achieve maximum signal strength by rotating the unit slightly while observing
the bars for maximum signal strength.
8.
Once unit position is complete, hard power recycle by manually disconnecting and reconnecting AC
power. This will allow the unit to automatically set up on the new band assignment
.
Important: This step must be performed to save the selected band.
B. SelectaCell Setup Instruction through USB
Setup instructions via the USB port and requiring a computer connection to the SelectaCell®
Before configuring the unit over USB, the application software must be loaded into the computer from
the SelectaCell Application Software CD included.
1. Insert CD and save files to a folder
2. Go to the saved folder
· Install dotnet by running “ dotnetfx.exe ” file (double click)
· Follow the set up procedure displayed
3. Next Open the SelectaCell® USB App Setup folder
Signal Strength Indicator
(2dB steps)
0 to 8 Bars on Graph
Gain Setting Indicator
(2dB steps)
0 to 8 Bars on Graph