![background image](http://html.mh-extra.com/html/ems-wireless/selectacell-19s/selectacell-19s_operators-manual_2404783010.webp)
SelectaCell
TM
Operator’s Manual – Preliminary
EMS
Wireless
EMS
Wireless
SelectaCell®-19S
Manual
Confidential and Proprietary Information
IM609873-1 Rev 01
07/11/05
9
Frequency setting changes are password protected and by pressing
Ctrl-Alt-p
enter password
as all caps "
PASSWORD
"
a. Select the “
By Band
” method of Frequency Selection
i. Select the appropriate PCS band or sub-band with a mouse click. (Single alpha
letter of entire band or alpha numeric segments).
ii. Bandwidth selection of 5 MHz or 15 MHz will display automatically if band is
selected by band but is also used to select frequency band width filter size
entering
Center Frequency
.
b. After selecting the correct frequency band, save by selecting the “
Set
” button with a
mouse click to activate and store this information in the SelectaCell®.
c. Next move to the next screen by selecting the top
Contro
l tab
i. Press
to
Restart
and view the power and gain. (Screen C) and save all
programmed information
d.
“
By Center Frequency
” method of Frequency Selection
i. Click on and select the appropriate box for
By Center Frequency
ii. Select the requested Bandwidth filter size of either
5 MHz
or
15 MHz
iii. Input the 4 digit PCS downlink frequency and Uplink the uplink frequency will
appear .
e. Verify input downlink and uplink frequency
f. After selecting the correct frequencies, save by selecting the “
Set
” button with a mouse
click
g. Next, to activate and store this information in the SelectaCell® move to the next screen
by selecting the top
Contro
l tab
i. Press
Restart
and view the power and gain. (Screen C) and this will save all
programmed information, which will take 15 – 20 seconds to reset
Note: if “
Restart
” is not activated, the unit will not retain the requested band and will
startup in the previously selected or factory fault band upon a power recycle.
.
9.
Viewing System Downlink and Uplink RF Power and Gain (Screen C)
a.
Select the screen
Control
tab
b.
Activate “
Restart
” button with a mouse click to view the newly selected frequency
band setup, which will take 30 – 60 seconds to adjust.
c.
When the unit LCD displays OK, disconnect the USB cable
Place the unit in a window with the LCD facing desired coverage area, wait a few minutes for
automatic adjustment and now you are up and running.
Содержание SelectaCell-19S
Страница 3: ......