EMS Wireless EkoMini M1.9, Руководство оператора

Страница: 14 / 41

IM 610179-1, Rev 02
08/25/06
Page 13
Using A Web Browser to Control the EkoMini
Web Browser Overview
The web browser will allow you to monitor the operation of the EkoMini and configure some of
the parameters. The web interface can be used locally with a computer connected to the
EkoMini or through the wireless modem connection.
Connecting Remotely or through the Ethernet Power
Local Connection
The user must make sure the computer connected locally is configured properly to use the local
ethernet connection. Make sure you are using an Ethernet Crossover cable or the connection
will not work. Connect the ethernet crossover cable from the ethernet port on the computer to
the ethernet port on the IPWMM.
The instructions that follow will show how to set up the computer to interface to the IPWMM.
The instructions are for a computer running Windows XP. The computer must be set up to have
a static IP address. How to do this is explained below.
Setting up Windows XP for Static IP
1. Start up the computer and click on the Start button, lower left of the screen.
2. Click on “Control Panel”. See Figure 1.
3. In the “Control Panel” window, double click on “Network Connections” See Figure 2
4. In the “Network Connections” window find the Local Area Connection. Move the mouse
over it, left click to highlight it. See Figure 3.
5. Click the right mouse key and select from the menu “Properties”
6. On the “Local Area Connection Properties” window, select “Internet Protocol” and click
on the “Properties” button. See Figure 4.
7. In the “Internet Protocol (TCP/IP) Properties” click on the “Alternate Configuration” tab.
See Figure 5.
8. Make sure the ‘User Configured’ option is selected.
9. Enter the IP address and Subnet Mask as shown in Figure 5.
10. Click the OK button. The computer may take awhile to save the changes.
11. You are ready to connect now.
12. Start an Internet browser session (Explorer or equivalent)