![background image](http://html.mh-extra.com/html/ems-imaging/xtremedv-hd4/xtremedv-hd4_user-manual_2404769012.webp)
Installing Multiple Cards
10
Multiple cards can be installed in a system providing a large number of capture channels.
Combinations of Xtreme capture cards in the same machine are supported by the Xtreme driver.
In order to control the order in which the driver uses the cards, it is recommended when installing
multiple cards that the
J5
links on the XtremeDV-HD4+ are
configured.
The example below shows the
jumper link settings for up to 32 cards in a single system. When two cards share the same link settings,
their order is determined by the PCIe bus.
Fig.5
DirectShow
If you change the link ordering after installation you must run
dplinks.exe
. This program will update
the existing input names used by the windows DirectShow interface.
To run the dplinks program open the
Run
dialogue by clicking on
Start/Run
and type dplinks and
then press Enter.
The program will run, however no notifications are displayed.
Содержание XtremeDV-HD4+
Страница 1: ...XtremeDV HD4 UserGuide Version 1 0 5 ...