37607-1-0817
Page 28
PIPE LENGTH
WALL STRAP
CEILING FIRE STOP
90° ELBOW
90° ELBOW
OR
45° ELBOW
WALL THIMBLE
HORIZONTAL
TERMINATION
(MAXIMUM OF
THREE 90 ELBOWS
VERTICAL
TERMINATION
(MAXIMUM OF
THREE 90 ELBOWS)
STORM COLLAR
ROOF FLASHING
Figure 46
VENT SYSTEM IDENTIFICATION
SPECIAL VENT SYSTEMS
Determine if the fireplace termination is to be vented vertically or
horizontally. Begin the vent system installation by selecting the
type of venting to be installed and the path it will take. Verify that
clearances are met throughout the path of the venting system.
NOTICE:
Unit requires 12 inches of rise before elbow, as well as 2
inches of clearance around first 12 inches of pipe.
Special Venting Components (Duravent)
See Empire Comfort Systems Retail Price List for Venting part
numbers and pricing.
SPECIAL DV VENT KITS
Available from Empire Comfort Systems, Inc. dealers
DVVK-4FV
Vertical Flex Vent Kit 4 inch x 7 inch
DVVK-4VP
Direct-Vent Fireplace Vent Kit - Vertical.
DVVK-4TP
Direct-Vent Fireplace Vent Kit for Top Vent,
Thru-the-wall, 8 to 11-inch wall thickness,
Includes SD-911, SD-985, SD-990 and
SD-942
DVVK-4TSP
Direct-Vent Fireplace Vent Kit for Top Vent,
Thru-the-wall, 5 to 7-inch wall thickness,
Includes SD-908, SD-985, SD-990 and
SD-942
•
Duravent® DVA-H2
•
Duravent® GS
•
American Metal Products
•
Selkirk Direct-Temp®
•
Security Secure Vent®
•
Empire Flexvent Kit DVVK-4F, refer to page 37 - 38.
•
Metal Fab Sure Seal®
– Adapter is required to use this vent
Contact Metal Fab
Use one of the following 4 x 6-5/8 vent systems:
Or the following 4 x 6-1/2 vent system:
