37607-1-0817
Page 12
FBB10 BLOWER KIT INSTALLATION (OPTIONAL) (CONT’D)
4. Remove log set and decorative media. Remove brackets
and liners if installed. Retain bracket and screws for
reassembly.
See Figure 7. (Reflective liners shown)
Figure 7
5. Remove burner cover by lifting off.
See Figure 8.
Figure 8
6. Remove log support by removing the two screws securing
the metal plate to log support. Retain log support and screws
for reassembly.
See Figure 9.
Figure 9
7. Remove the four screws securing burner and slide to right
then lift burner off. Retain burner and screws for reassembly.
See Figure 10.
Figure 10
8. Remove ten screws and lift burner assembly. Disconnect
gas line. Retain screws and burner assembly for reassembly.
See Figure 11.
Figure 11
9. Remove the four screws securing the left latch assembly
to the underside of the firebox. Retain screws and latch
assembly for reassembly.
See Figure 12.
Figure 12
