manualshive.com logo in svg

Empire Comfort Systems MILLIVOLT DVCP36PP30N, Инструкция по установке и руководство пользователя, Страница: 69 / 80

Поделиться
Скачать
Empire Comfort Systems MILLIVOLT DVCP36PP30N Скачать руководство пользователя страница 69

36092-10-0619

Page 69

MAINTENANCE AND SERVICE (CONT’D)

Glass Removal and Replacement

1.  Remove bottom access panel.

2.  Release two glass frame clamps at bottom of firebox.

3.  Remove glass frame and screen frames as a unit.

4.  Place glass and screen frames onto firebox.

5.  Attach two glass frame clamps at bottom of firebox.

6.  Replace access panel. 

WARNING

Do not operate fireplace with the glass front removed, cracked, 

or broken. Replacement of the glass should be done by a 

licensed or qualified service person.

Figure 76

Separating Screen Frame From Glass Frame

1.  Turn glass and screen frame assembly upside down and rest 

the glass frame on a block of wood, step, or similar object.

2.  Push downwards on screen frame to release the tabs from 

the glass frame.

Note: When reattaching screen frame to glass frame, orient the 

screen frame so that the tabs with notches are on the top 

side of the glass frame.

SCREEN
FRAME

GLASS

FRAME

PUSH

DOWN

TABS WITH NOTCHES
GO ON TOP SIDE

Figure 77

Содержание MILLIVOLT DVCP36PP30N

















































































Отзывы:

Нет отзывов