Empire Comfort Systems DVP20MS, Инструкция по установке и руководство пользователя, Страница: 12 / 68

42603-4-0421 Page 12
Venting Graph (Dimensions in Feet)
1. Determine the height of the center of the termination. Using this
dimension on the Venting Graph, locate the point it intersects
with the slanted graph line, or the right edge of the graph.
2. From the point of this intersection, draw a vertical line to the
bottom of the graph.
3. Adjust the indicated maximum dimension for additional elbows
if necessary.
4. Position the unit so that maximum horizontal run is not exceeded.
Venting Requirements:
• Minimum vertical rise from appliance outlet before any elbows =
12 inches (305mm) for DVP20MS(LP,NAT) and DVP30MSNAT
and 24 inches (610 mm) for DVP30MSLP.
• Maximum vertical rise from appliance outlet = 40 feet (12.19 m).
• Maximum vertical rise and horizontal run is a combined total
of 25 feet (7.62 m).
• Maximum elbows = two 90°, for the second elbow subtract 5
feet from a horizontal run.
VENTING STOVE ( CONT'D )
A
"A" Dimension
DVP20MS 24" (610mm)
DVP30MS 27" (686mm)
Figure 8 - Snorkel Installation
VENTING APPLICATIONS INFORMATION
Model
Venting Run
Description
DVP20
Propane
DVP20
Natural
DVP30
Propane
DVP30
Natural
DVKHP45
24" Vertical,
then 90
degree
elbow to
Horizontal
Termination
Yes Yes Yes Yes
DVK45LP
Straight out
back with
Horizontal
venting and
termination.
May require
additional
venting
with 18"
maximum
Horizontal
run allowed.
Yes No No No
DVK45NAT
Straight out
back with
Horizontal
venting and
termination.
May require
additional
venting
with 18"
maximum
Horizontal
run allowed.
No Yes No No
DVKVP45
12" Vertical,
then 90
degree
elbow to
Horizontal
Termination.
Includes
a 11"- 17"
slip vent
section.
Yes Yes No Yes
DVKVP45
Kit used
with a 14"
Snorkel on
outside of
building.
Yes Yes No Yes
DVKVP45
Kit used
with a 36"
Snorkel on
outside of
building.
Yes Yes Yes Yes
DVKVP
96" Vertical
Termination
Yes Yes Yes Yes