35646-2-0617
Page 4
IMPORTANT SAFETY INFORMATION
Installer:
Please leave these instructions with the owner for future
reference.
For Installation In Solid Fuel Burning Fireplaces. Do not burn wood
or solid fuels in a fireplace where a decorative gas log set is installed.
This appliance is for installation only in a solid fuel burning fireplace,
masonry fireplace or manufactured fireplace.
WARNING
Any modification to this gas log set or to controls can be
dangerous. Improper installation or use of the gas log set
can cause serious injury or death from fire, burns, explosion
or carbon monoxide poisoning.
1. Please follow all local codes regarding installation, combustion
and ventilation air or in the absence of local codes follow the
National Fuel Gas Code ANSI Z223.1(U.S. installation), or
CAN/CGA-B149, Installation Code (Canada installation) and
with ANSI Z21.60 Decorative Vented Appliances for Solid Fuel
Burning Fireplaces.
2. Proper installation, burner pan location and log placement is
important to achieve optimum look and performance of your
gas log set. The logs have been designed for easy location
and placement on the grate and must be followed for proper
operation.
3. Do not operate this log set with glass doors in the closed posi-
tion. A fireplace screen must be in place when the log set is
burning. Adequate combustion air must be provided for proper
venting. All flames should go up and out the top of the firebox
into the flue vent. If any flames float or curl forward into the
room
do not operate appliance.
Check for an open flue and
adequate combustion air into the room. A damper clamp must
be installed on the firebox damper to maintain an open flue
vent condition.
4. Young children must be carefully supervised when they are in
the same room as the gas log while in operation. Do not place
stockings, clothing or any flammable material above or near
the fireplace.
5. Do not substitute or use materials other than those supplied
for use with the log set.
DO NOT OPERATE THIS GAS LOG SET WITH GLASS
DOORS CLOSED.
•
Due to high temperatures the appliance should be located
out of traffic and away from furniture and draperies.
• Children and adults should be alerted to the hazards of
high surface temperatures and should stay away to avoid
burns or clothing ignition.
• Young children should be carefully supervised when they
are in the same room as the appliance.
• Clothing or other flammable material should not be placed
on or near the appliance.
• Do not place trash or other articles on the log set during
operation.
• During manufacturing, fabricating and shipping, various
components of this appliance are treated with certain oils,
films or bonding agents. These bonding agents are not
harmful but may produce annoying smoke and smells as
they are burned off during initial operation of the appliance.
This is a normal temporary occurrence. A window should
be opened during the initial bake out period.
• Keep burner and control compartment clean.
WARNING
• Before installing in a solid fuel burning fireplace, the
chimney flue and firebox must be cleaned of soot,
creosote, ashes and loose paint by a qualified chimney
cleaner.
• Do not allow fans to blow directly into the fireplace. Avoid
any drafts that alter burner flame patterns.
•
Do not use a blower insert, heat exchanger insert or other
accessory not approved for use with this appliance.
•
Installation and repair should be done by a QUALIFIED
SERVICE PERSON.
The appliance should be inspected
before use and at least annually by a qualified service
person. More frequent cleaning may be required due to
excessive lint from carpeting, bedding materials, etc. It
is imperative that control compartments, burners and
circulating air passageways of the appliance be kept clean.
• DO NOT put anything around the fireplace that will obstruct
the flow of ventilation air.
• DO keep the appliance area clear and free from combustible
material, gasoline and other flammable vapors and liquids.
•
A yearly examination and cleaning of the venting system
of the solid-fuel burning fireplace must be performed by
a qualified agency.
• DO make a periodic visual check of pilot and burners.
Clean and replace damaged parts.
• DO NOT use this appliance if any part has been under water.
Immediately call a qualified service technician to inspect
the appliance and to replace any part of the control system
and any gas control which has been under water.
