35651-0-0615
Page 15
FINAL SET UP
WARNING
Failure to position the parts in accordance with all included
pictures, diagrams and drawings, or failure to use only parts
specifically approved with this appliance may result in property
damage or personal injury.
IMPORTANT
Cover the pilot and valve assembly, and for Liquid Propane
units, the air mixer at the side of the burner to protect it before
installing sand and glowing embers.
1. Pour the provided glass over each burner filling the burner
pans. The glass should follow the slope of each burner pan,
covering each burner completely.
Figure 13
2. Spread the glowing embers over the ember burner.
Figure 14
3. Place the lava rock (cinders) around the burner assembly.
Figure 15
WARNING
Apply loose material (embers and lava rock [cinders]) per
instruction manual. DO NOT apply extra material not supplied
with this appliance. All previously applied loose material (em
-
bers) must be removed prior to reapplication.
CAUTION
DO NOT place glowing embers, sand, rockwool mix, or lava
rock (cinders) in the area of the safety pilot assembly.
STOP!
Refer to the log set up instructions packaged with your Decora
-
tive Gas Logs.
4. Remove all contents from the Decorative Gas Log shipping
container.
5. Check the contents of the shipping container against the
shipping and packing list or the parts list in this manual.
Report any missing or damaged parts to your retailer.
6. Remove any and all protective wrapping from the gas logs.
7. Arrange the decorative gas logs on the grate.