Phoenix Garment User Manual
4
Garment Use
1.
Lay the garment flat with the three conductive
silver buttons facing up as pictured.
2.
Remove the blue plastic lining from the grid side
of Phoenix Garment Electrodes and discard.
3.
Press the grid side of the Phoenix Garment
Electrodes over the silver buttons within the
appropriate outlines. If you are using the garment
to treat your right leg, place the electrodes in the
grey outlines marked with “Right Leg Electrode
Placement”. If you are using the garment to
treat your left leg, place the electrodes in the
white outlines marked with “Left Leg Electrode
Placement”. The large electrode should only be
placed within the corresponding larger grey/white
dashed outline.
IMPORTANT:
Make sure to place ALL THREE
electrodes on the garment before using.
The electrodes must completely cover each
conductive metal button before use.
STOP!
If you are using the garment for your
LEFT leg, you should have it set up to look like
Fig. 1
If you are using the garment for your RIGHT leg,
you should have it set up to look like Fig 2.
4.
Remove the remaining clear liner from the face
of the electrodes and SAVE for re-application to
Phoenix Garment Electrodes in between uses.
5.
Sit on the edge of a firm, stable chair with your
knee slightly bent and your foot flat on the floor.
If your clinician instructed you to use the device
and garment in a different setting or position,
follow your clinician’s instructions.
Fig. 1 Left
Fig. 2
Right