Empava EMPV-30RH13, Руководство по установке и инструкция пользователя

Страница: 10 / 13

10
RANGE HOOD CARE
Cleaning
WARNING
• Toreduce the risk of electrical shock, DO NOT clean
the hood while it's operating.
• Neverput your handsintothe areahousingthefan
when the fan is operating.
Cleaning the Exterior Surfaces:
IMPORTANT
To avoid damage to the exterior surfaces:
• DO NOT use corrosive or abrasive detergent.
• DONOTusesteelwool,scoringpadorsteel
brushes. Use a paper towel or soft cloth or
nonabrasive spongeinstead.
• DO NOT use salt solutions, disinfectants, bleaches
or cleaning compound that contains harmful
chemicals.
Cleaning Method:
• Noncorrosive or nonabrasive liquid detergent soap
or all-purpose liquid cleanser.
• Wipe the surfaces with a damp paper towel or soft
cloth or nonabrasive sponge.
• Rinse with cleanwater.
• Wipe dry with dry towel or cloth.
Note
• Thenonabrasivestainlesssteelpolishercanbe
appliedwhendonecleaningtoretainthestainless
luster and grain.
• Always follow the instruction of the polisher.
Cleaning the Stainless Steel Baffle Filters:
• Pullthespringreleasehandleandremovethefilter
by pulling itdown.
• Wash the filters in the dishwasher, or soak it into
hot or warm water with dish detergent for half an
hour,thenwipethefilterclean.Repeatthesesteps
until there's no oil residue remains.
• Let the filters dry thoroughly.
• Makesurethespring releasehandleistowardthe
front, align and insert the filter.
• Pullthespringreleasehandleandpushthefilter
into position.
• Release the handle.
• Repeat the steps for the remaining filters.
Replacing the Filters
• Replacethebafflefilters immediately shouldthey
becomewornoutduetoagingorprolongedusage.
Replacing the LED Lamps
WARNING
Electrical Shock Hazard
Disconnect power before servicing
Wear gloves to protect against sharp edges
• Thisrangehooduses120VLED.( ModelNo.:GU10 .)
• Unplug the range hood, or turn off the breaker.
• Press on the rim of the Lamp and twist counter-
clockwise to unlock the Lamp.
• Pullout the defective Lamp.Usea
flathead screwdriver if needed.
• Align and put the new Lamp back into position.
• Press on the rim of the new Lamp and twist
clockwise to lock the Lamp in position.
• Plug in the range hood, or turn on the breaker.
• Check if the new Lamp is working properly.