20
“
”or”
” to adjust heating time, after 5s no operating ,backup the revised time and
exit to current time.It will heating according to the set up time ,and display with current
remain heating time.You can also re-set a new heating time when in working .
2
）
Max heating time is 10hr, when add to max heating time, continues
“
”is invalid.
e
、
Preheat time set up :
When in working condition ,press
“
”, and activate the function setting up status,
continue press till preheat time display, the symbol flicker, ,press
“
”or”
” to adjust
preheat time, after 5s no operating ,backup the revised time and exit to current time.You
can also re-set a new preheat time when in working .
1
）
Preheat time range :current time +heating time
≤
preheat time
≤
c23:59
2
）
For example :Client need heating two hours ,and could set up in two ways
①
Suppose current time is 12:00,use heating time function ,and set up heating time
with 2hr
②
Suppose current time is 12:00,use preheat function .and set up preheat time with
14:00
Remark: If set up heating time and preheat time at same time ,before heating status ,both
symbols will indicate ;when go to heating status ,preheat time symbol will disappear ,and
indicate with heating time symbol ,display with heating remain time .
1
）
After finish each time setting ,Sound from buzzer (2min),display with flicker
“0:00”;press any
key-press or after 2min ,buzzer stop sounding .and display change from flicker
“0:00” to next
precedence (remain) time .If system finish all the set time ,then to to standby ,display with
current time .
2) During the buzzer sounding, press
“
” to stop noise
CLEANING AND MAINTENANCE
By ensuring proper cleaning and maintenance of your cooker, you can have a significant influence on the
continuing fault-free operation of your appliance.
Before you start cleaning, the cooker must be switched off and you should ensure that all knobs are set to
the “OFF” position.
Do not start cleaning until the cooker has completely cooled.
