Page 15
XPA Gen3
Specifications
Modular Construction
The XPA Gen3 modular power amplifier is comprised of a heavy-duty chassis, which houses the
oversized power supply, and up to seven amplifier modules. The XPA Gen3 can be purchased with
anywhere between two and seven amplifier modules installed, and additional amplifier modules
may be installed as more channels of amplification are needed (up to a maximum of seven
modules). The front panel display and protection system are designed to work with the maximum
number of channels, and so need not be updated when the XPA Gen3 is expanded; on the rear
panel, slots not occupied by amplifier modules will be covered with protective cover panels.
Note: To ensure that additional amplifier channels are installed properly, and function to our
specifications, additional amplifier modules must be installed by Emotiva, or by your local
authorized Emotiva service representative.
A Word About Power Ratings
Music is, by its nature, dynamic. While it’s relatively common for the two main channels in a stereo
amplifier to be asked to simultaneously deliver high power levels, it is very uncommon for more
than two channels to be called upon to deliver high power continuously at the same time, and
this almost never occurs outside of laboratory test conditions.
In order to deliver the most dynamic performance where it counts - with real music - we have
designed the XPA Gen3 modular power amplifier with a single immense power supply, which is
able to deliver massive power continuously to any two channels, and to deliver huge amounts of
power dynamically to any number of channels when and if called upon to do so.
The power ratings for the XPA Gen3 modular power amplifier are the same with both channels
driven continuously in the two-channel version of the amplifier, and for
ANY TWO CHANNELS
DRIVEN CONTINUOUSLY
in the versions of the XPA Gen3 configured with three, four, five, six, or
even seven output channels.
In addition to this, because we always aim to provide the most complete information possible,
we have also rated the other versions in terms of continuous power (under laboratory conditions)
with all channels driven.
Also note that, while the exceptional sound quality of the XPA Gen3 modular power amplifier, and
its two-channel continuous power rating, remain the same whether you choose to use a 120 VAC
line or a 230 VAC line, the multi-channel power ratings are somewhat higher when you power the
XPA Gen3 from a 230 VAC circuit. While the XPA Gen3 modular power amplifier will provide plenty
of power for most home theater installations when run from a 120 VAC line, for the absolute best
possible performance, we recommend operating the XPA Gen3 from a 230 VAC line.
