Page 11
XPA Gen3
Quick Start
To get the most from your XPA Gen3 modular power amplifier we urge you to read the entire
manual. If you just can’t wait to listen to it, this section will cover the basics you need to get
started.
• Find a secure location for your XPA Gen3.
• Connect your XPA Gen3 to a signal source.
• Set the Input Selector switches on each channel of your XPA Gen3 for the type of input you’re
using (unbalanced or balanced)
• Connect your XPA Gen3 to a set of speakers (4 ohm or 8 ohm) using reasonably heavy gauge
speaker wires (at least 16 gauge).
• Find some music you
really
like to listen to.
• Turn on the AC Power switch and turn up the volume a bit!
• Enjoy!
While you’re enjoying your XPA Gen3, it would be a great time to read the rest of the manual to
learn more about it.
