Emotiva Gen 2 XPA-5, Руководство пользователя

Страница: 22 / 28

Page 18
XPA-5
Troubleshooting
The XPA-5 is carefully designed and manufactured from high-quality precision components to
ensure years of trouble free operation. We really doubt you’ll ever have any problems with your
XPA-5, but if you do, here are a few things you could try:
Problem: No output (nothing is lit).
Reason: You have no AC power.
• Verify that the rear panel AC Power switch is On.
• Verify that your circuit is live.
• Verify that the line cord on the XPA-5 is fully inserted and is tight.
Problem: The XPA-5 is operating normally, but none of the front panel
status LEDs are lit.
Reason: The front panel status LEDs are turned off.
• Set the Status LEDs switch on the rear panel to On.
Problem: No sound or distorted sound is heard; the Standby button halo
is lit blue; the status LEDs are lit blue.
Reason: The XPA-5 is not indicating a fault condition.
• Check your source.
• Check your Balanced/Unbalanced Selector Switches.
• Check your speakers and speaker connections.
Problem: No sound is heard; one or more Status LEDs is flashing red.
Reason: The XPA-5 is in Protect mode, which indicates a fault condition.
• Switch the rear panel AC Power switch Off and On to clear the Fault condition.
• If the fault remains, look for a shorted speaker cable or damaged speaker.
• Check your sources and source connections (a bad interconnect, DC on the input,
or an otherwise bad source component can cause a fault).
Problem: The halo around the Standby button is lit amber and the XPA-5
fails to come on when triggered.
Reason: The XPA-5 is in Standby mode and should respond to a valid trigger signal.
• Check your trigger cable.
• Check the trigger settings on your source equipment.