background image

DO NOT defeat the safety purpose of a grounding or polarized plug by removing ground 

pins or using unsafe adapters. A polarized plug has two blades - one wider than the other. A 

grounding plug has a third ground prong in addition to the two main conductors. The wide 

blade or third groundling prong is provided for your safety. If the provided plug does not fit 

your outlet, consult an electrician to replace your obsolete outlet. If you replace the power 

cord, only use one of similar type and equal or greater current rating.
The power cable for the Airmotiv 4s should be unplugged from the outlet during severe 

electrical storms, or when unused for a long period of time.
Only replace the fuse(s) in the Airmotiv 4s with a fuse(s) of proper value and voltage rating. 
The Airmotiv 4s should only be cleaned as directed in the manual. Avoid spraying liquids 

directly onto the unit and NEVER spray liquids into the port, drivers, or controls. Care should 

be taken so that small objects do not fall into the inside of the unit.
You should seek service for your Airmotiv 4s by qualified service personnel if any of the 

following occur:
1. The power-supply cord or the plug has been damaged. 

2. Objects or liquid have fallen or spilled into the vents. 

3. The unit has been exposed to rain. 

4. The unit exhibits a marked change in performance. 

5. The unit has been dropped, or its enclosure or chassis is damaged.

NOTE: TO COMPLETELY DISCONNECT THE AIRMOTIV 4S FROM THE AC POWER MAINS, 

DISCONNECT THE AC POWER CORD FROM THE AC RECEPTACLE.
NOTE: THE POWER CORD ON THE AIRMOTIV 4S MUST REMAIN READILY ACCESSIBLE AT ALL 

TIMES.
WARNING: BEFORE TURNING ON THE AIRMOTIV 4S, VERIFY THAT THE AC LINE VOLTAGE 

SWITCH ON THE REAR PANEL IS SET FOR THE CORRECT VOLTAGE FOR YOUR LOCATION.  

IF NOT, SET THE SWITCH TO THE CORRECT VOLTAGE AND REPLACE THE FUSE WITH ONE OF 

THE CORRECT VALUE FOR THAT VOLTAGE.

!

CAUTION

CAUTION: TO REDUCE THE RISK
OF ELECTRICAL SHOCK, DO
NOT REMOVE COVER. NO USER
SERVICEABLE PARTS INSIDE. 
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.

!

Содержание Airmotiv 4s





































Отзывы: