background image

Page 16

• 

Because surround speakers carry mostly ambience information and are influenced by the 

listening room, and because they are also used differently by different surround-sound 

decoding standards, you should experiment to find the best locations and orientations 

for your particular installation. We suggest you try them at various angles, and in various 

orientations (vertical, upside down, and even sideways) to identify the location and 

orientation that work best with your room. Some installations locate the surrounds facing 

sideways along the side or rear wall. The best way is whatever works well for you in your room. 

Surrounds should always, however, be positioned symmetrically (so, for example, if you locate 

your left side surround on its side with the high-frequency transducer towards the rear of the 

room, you should also locate it’s counterpart, your right-side surround, on its side with the 

high-frequency transducer towards the rear of the room.

• 

While you should avoid mounting front speakers in the corner angles of a room, corners are 

acceptable locations for surround speakers, but you may need to adjust the Low-frequency 

Equalization for best results.

• 

Always leave several inches clearance behind your 

airmotiv

 

4s

 powered monitors to avoid 

blocking the rear-positioned port and to allow the amplifiers to dissipate heat via the 

aluminum back plate fins, which will get warm in normal operation.    

Positioning your 

airmotiv

 

4s

 monitors as computer speakers

The Emotiva 

airmotiv

 

4s

 also makes an incredible computer speaker, either using the computer’s 

internal sound card or, better yet, a good quality external DAC (like our DC-1). When choosing 

optimum locations for computer speakers, most people prefer to position them as they would 

near-field monitors. If your computer also provides music for your entire living room or office, you 

may wish instead to position your 

airmotiv

 powered monitors as you would for a small high-end 

home stereo system.

Positioning your 

airmotiv

 

4s

 monitors for use with a music client or 

portable music player

The Emotiva 

airmotiv

 

4s

 will deliver beautiful high-quality sound when connected to a music 

client or portable music player. Depending on your specific requirements you may choose to 

position them as you would near-field monitors or as you would normal stereo speakers. Please 

refer to the appropriate section for more details.

NOTE: Virtually all computers and hardware music clients use a digital volume control, which 

can adversely affect sound quality at some settings. If this is the case, you will improve sound 

quality, especially at lower settings, if you use a passive volume control (like our Control Freak) 

between your source and your 

airmotiv

 

4s

 

 monitors. 

Содержание Airmotiv 4s





































Отзывы: