Emos P5731, Руководство пользователя

Страница: 3 / 48

3
GB | Wireless Doorbell
The set consists of a doorbell button (transmitter) and two chimes (receivers).
The chime is deigned for constant connection to 230 V AC/50 Hz mains. The
button is battery-free. Transmission between the button and the chime is done
via radio waves at a frequency of 433.92 MHz. The range depends on local
conditions and reaches up to 180 m in open spaces without interference. The
set has a so-called “self-learning” function – the button is able to generate its
own pairing code which is then received by the chime and stored in its memory.
The set can thus be expanded with additional buttons. Their “self-learning”
function also prevents the set from affecting neighbouring doorbells. For
proper usage of the wireless doorbell, read the instruction manual thoroughly.
Specifications
Transmission range: up to 180 m in an open area (can drop down to one fifth
in a busy area)
Transmission frequency: 433.92 MHz, 5 mW e.r.p. max.
Button: water resistant; enclosure rating IP44
Pairing of chime with buttons: self-learning function
Pairing capacity: maximum of 6 buttons (replacement button P5729T)
Number of ringtones: 36
Chime power supply: 230 V AC/50 Hz
Button power supply: battery-free
Includes: double-sided adhesive tape
Chime Description
(see Fig. 1)
1 – bell LED
2 – speaker
3 – pairing/volume setting button
4 – ringtone change button
Button Description
(see Fig. 2)
1 – button LED
2 – ring button
3 – holes for opening the battery
cover (rear)
4 – openings for mounting onto
a wall
Pairing the Button with the Chime
1. Plug the chime unit into a 230 V AC/50 Hz socket.
2. Then, long-press the pairing button on the chime for ca. 5 seconds.
3. The chime LED will light up; release the button.
4. The chime will switch to self-learning pairing mode which lasts
for 25 seconds.
During this time, press the ring button. The chime will ring and the