Emos P4519, Руководство пользователя

Страница: 2 / 24

2
1450000190_31-P4915 148 × 210 mm
GB
Rechargeable LED Lantern - E4007L
Specifications
The rechargeable lamp is resistant to rough conditions (dust, dirt) and is therefore suitable for technicians, handymen and cottagers,
as well as for use in the car. The lamp has a magnet and a hook for hanging. The lamp‘s reflector can be turned horizontally by
45° to both sides and vertically by 180°. The lamp has a stand for use as e.g. a bedside lamp. The lamp can remain lit continuously
when fully charged for approximately 2.5 hours. The lamp can be charged, or recharged, from a 100–240 V~, 50/60 Hz network
or from a car socket with 12/24 V =. The lamp can be used while the accumulator is recharging.
1
2
3
4
5
6
1.
Switch
2. Hook
3.
Magnet
4. LED recharge indicator
5. Socket for charging
6.
Stand
Specifications:
Light source 4 W COB LED (320 lm)
Accumulator pack Li-Ion 18650 – 3.7 V= 2 200 mAh
Network power adapter type TEKA006-0501000EUU;
input 100–240 V~ 50/60 Hz, max. 0.3 A
output 5 V=/1 000 mA
Recharging from car 12/24 V=
Power source for car adapter, input: 12/24 V= output: 5 V=/ 1 000 mA
Recharging the Accumulator
Before first use or if the lamp does not shine anymore, it is necessary to charge the lamp. Recharging a fully discharged
accumulator pack takes approximately 4 hours (the recharge time depends on how depleted the accumulator is). Recharge
the lamp in dry indoor areas.
1. Connect the network power adapter (type TEKA006-0501000EUU) to a 100–240 V~, 50/60 Hz network.
2. Turn the switch on the lamp to the off position.
3. Connect the network power adapter into the lamp‘s power connector – a red light will turn on on the lamp. When the lamp
(accumulator) is fully recharged, the LED will turn green.
4. After recharging, disconnect the adapter from the lamp.
The accumulator can be recharged intermittently – it has no memory effect.
The lamp can also be recharged in a car – 12/24 V= through the lighter socket. Procedure for plugging in and recharging is
similar as when using a network adapter. After recharging, disconnect the car adapter.
The lamp can be recharged using
a car adapter only when the vehicle is stationary and the engine is turned off. Do not under any circumstances charge
the lamp when the car engine is running or the car is in motion.
The LED light sources have a 50,000 hour service life and therefore need not be recharged. After exhausting, the entire lamp
can disposed of.